The newest Trend in the Industry. These glitters, while are light-weight, but can still hold up the design integrity. Furthermore, with brilliant variation of colors. They have done more than earning their spot.
net wt. 1g~0.04oz
dimension: 4mm x 2mm per scale
🐉 Dragon Scales 3D Glitter Application
Step 1 — Apply
After applying and curing two coats of gel polish, apply iHold Condensed Glue Gel where you want the Dragon Scales.
Do not cure.
Float a thin layer of iHold No Wipe Top Coat or Matte Top Coat over the Glue Gel.
Do not cure.
Step 2 — Place
Use the Glitz Crystal Picker to place and adjust the Dragon Scales on the uncured gel.
Clean around the sidewalls if needed, then LED cure for 60 seconds.
Step 3 — Secure
Using iHold Precision Glue Gel, apply a small amount around the edges and between the Dragon Scales for extra hold.
LED cure for 60 seconds.
Step 4 — Encapsulate
Apply iHold Condensed Glue Gel, followed by iHold No Wipe Top Coat, to seal and protect the design.
LED cure for 60 seconds.
Step 5 — Remove
Carefully remove the Dragon Scales with a Crystal Removal Clipper. File away remaining product with an e-file or hand file, or soak with professional acetone as needed.
The newest Trend in the Industry. These glitters, while are light-weight, but can still hold up the design integrity. Furthermore, with brilliant variation of colors. They have done more than earning their spot.
net wt. 1g~0.04oz
dimension: 4mm x 2mm per scale
🐉 Dragon Scales 3D Glitter Application
Step 1 — Apply
After applying and curing two coats of gel polish, apply iHold Condensed Glue Gel where you want the Dragon Scales.
Do not cure.
Float a thin layer of iHold No Wipe Top Coat or Matte Top Coat over the Glue Gel.
Do not cure.
Step 2 — Place
Use the Glitz Crystal Picker to place and adjust the Dragon Scales on the uncured gel.
Clean around the sidewalls if needed, then LED cure for 60 seconds.
Step 3 — Secure
Using iHold Precision Glue Gel, apply a small amount around the edges and between the Dragon Scales for extra hold.
LED cure for 60 seconds.
Step 4 — Encapsulate
Apply iHold Condensed Glue Gel, followed by iHold No Wipe Top Coat, to seal and protect the design.
LED cure for 60 seconds.
Step 5 — Remove
Carefully remove the Dragon Scales with a Crystal Removal Clipper. File away remaining product with an e-file or hand file, or soak with professional acetone as needed.
Image 1 of 16
Image 2 of 16
Image 3 of 16
Image 4 of 16
Image 5 of 16
Image 6 of 16
Image 7 of 16
Image 8 of 16
Image 9 of 16
Image 10 of 16
Image 11 of 16
Image 12 of 16
Image 13 of 16
Image 14 of 16
Image 15 of 16
Image 16 of 16
