The newest Trend in the Industry. These glitters, while are light-weight, but can still hold up the design integrity. Furthermore, with brilliant variation of colors. They have done more than earning their spot.
net wt. 1g~0.04oz
dimension: 4mm x 2mm per scale
🐉 Dragon Scales 3D Glitter Application
Step 1 — Apply
After applying and curing two coats of gel polish, apply iHold Condensed Glue Gel where you want the Dragon Scales.
Do not cure.
Float a thin layer of iHold No Wipe Top Coat or Matte Top Coat over the Glue Gel.
Do not cure.
Step 2 — Place
Use the Glitz Crystal Picker to place and adjust the Dragon Scales on the uncured gel.
Clean around the sidewalls if needed, then LED cure for 60 seconds.
Step 3 — Secure
Using iHold Precision Glue Gel, apply a small amount around the edges and between the Dragon Scales for extra hold.
LED cure for 60 seconds.
Step 4 — Encapsulate
Apply iHold Condensed Glue Gel, followed by iHold No Wipe Top Coat, to seal and protect the design.
LED cure for 60 seconds.
Step 5 — Remove
Carefully remove the Dragon Scales with a Crystal Removal Clipper. File away remaining product with an e-file or hand file, or soak with professional acetone as needed.
The newest Trend in the Industry. These glitters, while are light-weight, but can still hold up the design integrity. Furthermore, with brilliant variation of colors. They have done more than earning their spot.
net wt. 1g~0.04oz
dimension: 4mm x 2mm per scale
🐉 Dragon Scales 3D Glitter Application
Step 1 — Apply
After applying and curing two coats of gel polish, apply iHold Condensed Glue Gel where you want the Dragon Scales.
Do not cure.
Float a thin layer of iHold No Wipe Top Coat or Matte Top Coat over the Glue Gel.
Do not cure.
Step 2 — Place
Use the Glitz Crystal Picker to place and adjust the Dragon Scales on the uncured gel.
Clean around the sidewalls if needed, then LED cure for 60 seconds.
Step 3 — Secure
Using iHold Precision Glue Gel, apply a small amount around the edges and between the Dragon Scales for extra hold.
LED cure for 60 seconds.
Step 4 — Encapsulate
Apply iHold Condensed Glue Gel, followed by iHold No Wipe Top Coat, to seal and protect the design.
LED cure for 60 seconds.
Step 5 — Remove
Carefully remove the Dragon Scales with a Crystal Removal Clipper. File away remaining product with an e-file or hand file, or soak with professional acetone as needed.
Image 1 of 19
Image 2 of 19
Image 3 of 19
Image 4 of 19
Image 5 of 19
Image 6 of 19
Image 7 of 19
Image 8 of 19
Image 9 of 19
Image 10 of 19
Image 11 of 19
Image 12 of 19
Image 13 of 19
Image 14 of 19
Image 15 of 19
Image 16 of 19
Image 17 of 19
Image 18 of 19
Image 19 of 19
